Whiteboard Self Adhesive Vinyl - Mini Roll

You can apply the vinyl to most flat and curved surfaces such as

✪ Ceramic

✪ Glass

✪ Wood

✪ Metal

✪ Plastic

✪ Mirror

*** PLEASE NOTE :- Cut settings can differ from each machine, blade and vinyl type. Updates to your machine can also effect cut settings. Always perform a test cut before cutting a full design even if you've cut the material before ***

✂ Cricut

- Matt Vinyl

✂ Silhouette

- Blade 3 / Speed 5 / Thickness (Force) 10

Step 1 - Clean the area you are applying to thoroughly

Clean the area thoroughly with isopropyl alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the decal from adhering well.

Step 2 - Prepare the decal for application

Prepare the decal for application by applying transfer tape and then firmly rub a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the decal cling to the transfer tape.

Step 3 - Peel the white paper backing off

Peel the white paper backing off the decal. If any part of the decal clings to the backing, slowly replace the paper backing and repeat Step 2.

Step 4 - Lower the decal onto the surface CAREFULLY

Slowly lower the decal onto the surface and rub it in place firmly with a squeegee or credit card. Remember the decal will not come back of without damaging the decal.

Step 5 - Slowly peel the clear transfer tape off

Slowly peel the clear transfer tape off at an angle. Be careful not to pull the decal off the surface. If decal pulls away from the surface repeat Step 4.


** Use a pin to poke any air bubbles in the centre and push the air out through the hole.

** For best results do not apply a decal in extreme hot or cold temperatures.

✪ Wait 24h before first wash

✪ Hand wash only with warm water

✪ Do not leave to soak in water

✪ Do not wash in a dishwasher

✪ Towel dry

✪ Do not use aggressive chemical agents